Consultancy Services

SES also offers a wide range of consultancy services pertaining to drilling and blasting in surface and underground mines.

The services include blast audits, problem-solving, blast optimization and training.

No matter the size of the project, we apply our proven four-step method.

01

Blast Audits

SES will assess all aspects of the drilling and blasting, including drilling performance, hole diameter, blast pattern, explosives specifications, initiation sequence, fragmentation and displacement.

This activity requires a site visit to understand the mine design and mining method and benchmark the current production activities.

02

Blasting

The specifications of the drilling and blasting equipment are documented. In addition, the explosives products and blasting parameters are recorded.

The shot firing crew and several blast are observed and videoed to understand the problems being experienced.

03

Problem Solving

From the initial visit, SES can make recommendations to establish trials or changes to the blast parameters to resolve the problems such as ore dilution and losses, fragmentation, blast damage to final walls, ground vibration, airblast, misfires and flyrock in surface mines and fragmentation, overbreak and blast damage in underground development drives and stopes.

Further fieldwork may be required to undertake fragmentation analysis, vibration and airblast readings and velocity of detonation measurements. 

Parameter changes may include adjustments to drilling direction, explosives type and quantity, initiation sequence, stemming material, hole diameter and length, and applying specialised blasting techniques such as trim blasting and pre splitting.

04

Blast Optimisation

Optimising blast parameters by using specialised analysis techniques to provide potential cost reduction savings. This includes:

  • A dilution study to maximise ore production by examining blast sequencing and selective digging techniques;
  • Fragmentation analysis to measure wear and tear on machinery and to match rock size with the processing equipment;
  • Vibration and air blast monitoring to certify compliance with statutory or site ground vibration and air overpressures limits; and
  • Perimeter control review to ensure that blast damage, overbreak and ground support is kept to a minimum
  • Training Courses – SES can provide training courses in country which can be site specific to the customers’ needs. The courses can be presented to all levels of management from shotfirers to engineers.

Book Your
Consultation

No matter the size of the project, we apply our proven four-step method.